|
|
|
Newsletters >
ARH SPRINGS
ARH SPRINGS
I have been getting several emails about springs lately.
It brought me back to the 1980s when these types of questions were often asked.
ARH springs offer no comparison to OEM or factory springs.
We use custom wire and dimensions, differing IDs, tensile strength, spacing, etc.
Not to mention differing wire sizes.
So, a comparison against the factory part is not valid.
A case in point was the first generation R1-HW80 and FWB 124-127 kits and springs that were far shorter
to allow easier installation and still outpowered the factory parts, although they were often 5 to 6 inches shorter.
You get questions if you send out a shorter spring that solves many issues.
If you send out long springs that everyone thinks are ideal, they can't get them installed, and often
they are not suitable for many reasons.
|
|
